Milwaukee M-18 FUEL Barrel Grip jigsaw description and review

Sharing is caring!

I have consistently made use of a D-handle or even”top-handle” fashion scrap booking. It’s because, that is the watched Should you asked me I’ve heard on 25 decades back. We are here to inform you that our notions and we been utilizing the Milwaukee M-18 FUEL Barrel Grip jigsaw.

Brushless Motor

The Milwaukee M 18 FUEL Barrel Grip Jig Saw has a brushless motor, also works at a greater blade rate than semi automatic jig saws. Only at 3500 strokes per second [RPM] that this saw is capable of cutting as much as 105 foot feet of 3/4″ laminated particleboard, which is the same to approximately 18 sink workouts. We analyzed this drums sound flat, and quantified 99 Decibels.

Using a changeable rate enables you”forget,” the rate therefore it’s possible to switch to the application, and concentrate on making that precise cutoff. The canister clasp adjuster includes a 6-speed dial, which range from 0-3500 strokes each week. No-load RPM drops to decrease vibration and line your own cut. Once the saw is pushed in to the cloth, the saw automatically feels turns and it the RPM up to full throttle. This setting enables the saw to start slowly at 1500 RPM and ramps up to 3500 RPM after the blade remains at the material.

The Milwaukee M 18 FUEL Barrel Grip Jigsaw includes ambidextrous power buttons, on the left and right side of this saw. The switch is obtained from some thing which people love, and also various hand positions. A fast movie on the on / off button triggers a great feature, the LED lighting. The switch needs to be stored from the on-position to get another or 2 to show on this tool, this can help prevent unintentional power-ups in the event the cause is bumped. The switch dries quickly, After the switch is switched off, and also the blade stops.


I frequently discover a jigsaw’s caliber could be summed up fairly quickly if you attempt to reduce on a 45-degree bevel onto a bit of 3/4″ plywood. I believe it is one of the best jigsaws specs – in the event that you’re able to cut at that bevel at a straight line without even fighting with the decoration got a winning combination. This decoration had no difficulty cutting on fine right cuts long spans.

When trimming 90-degrees this saw will be near flawless. The watched dip and the trimming caliber when trimming is amazing cuts just like a champ. We analyzed the decoration in Oak, Pine, framing timber and plywood. The saw monitors, and cuts in every those substances. We assessed for both parallels and square square and left 45 level directly and cuts. We did a scroll and also onto this particular evaluation we did notice several deflection on the scrolls that are competitive, but almost no.

Each of of jigsaws employ some form of counter balance system to lessen the up and down vibration generated by the reciprocating plunger and blade. No shaking that concerned us was felt by us.

Front with this tool includes a plastic, key less, slip actuated, blade shift which ejects the blade. All blades are used by this decoration. The saw includes a 1-inch stroke span, 4-position [0-3] rotational activity switch to permit the jig-saw versatility when cutting various substances. The blade folds fairly simple and ejects when published. We noticed some problems requiring a few futzing. This failed to happen each moment.

The key less shoe has favorable detents at 0°, 1-5 °, 30° along with 4 5 ° but may even hold its standing in between those configurations nicely. You want to work with a 4 millimeter Hex wrench to correct the bevel. The weapon storage is stable and tight without the stress of it slipping outside. Notice — Battery packs bigger than the usual 5.0 Ah will hit the work piece onto a 4 5 ° bevel.

LED Lighting

The Milwaukee M 18 FUEL jig-saw has just one incorporated LED which illuminates the workshop well, and remains on for 1 1 minutes following the trigger has been released. There’s just a tiny black, black plastic clip which insures the LED for upside down cutting edge. We are gambling this clip will likely soon probably be the very first thing, while a excellent concept. Internal, or even an LED switch would an even option for the particular application.

An On/Off cut-line mill keeps the cut clear of debris, also allows user to turnoff mill when working with dust extraction. The mill was analyzed by us and it’s really powerful. It completely emptied the sawdust 4″ in front of, and off from this tool. Milwaukee advises if working with dust removal — we really don’t agree totally that you become suction on, that you turn off the blower.

The Milwaukee M 18 FUEL jig-saw features a dust cap and dust extraction tubing that will be connects into a hose cleaner. In collecting dust, the saw does a pretty fantastic job, however it is near flawless. This jig-saw, like others, has a lean plastic blade cap which aids the dust collection system are more effective. It while it didn’t work well. It also gets cut-line that is impairing visibility, also needs cleaning. Notice — that the dust collection tubing can’t be employed in combination with battery packs larger than 5.0 ah. On the tube was hit by the batteries.


The M-18 FUEL Jig-saw weighs 4.9 pounds. It’s sensible and it has rubber over mold. Most the features are simple to use and fix. The barrel clasp is smooth to use. There’s extremely slight vibration and attract to the work piece provides you hands in precision cuts and curve cutting. This really is a good saw! My only concern is. This might possibly be only or an excellent control issue a flaw on the saw. We’re still analyzing this to find exactly how frequently it occurs.

Sharing is caring!

You may also like

Leave a Reply